Parameters
interface-type interface-number: Specifies a local interface. It can be any Layer 3 interface.
ipv4-address: Specifies the IPv4 address of a local interface.
ipv6 ipv6-address: Specifies the IPv6 address of a local interface.
vpn-instance vpn-name: Specifies the MPLS L3VPN to which the IPv4 or IPv6 address belongs. The
vpn-name argument is a case-sensitive string of 1 to 31 characters. To specify an IP address on the public
network, do not specify this option.
Usage guidelines
Use this command to specify which address or interface can use the IKE keychain for IKE negotiation.
Specify the local address configured in IPsec policy or IPsec policy template view (using the local-address
command) for this command. If no local address is configured, specify the IP address of the interface
referencing the IPsec policy.
You can specify up to six IKE keychains for an IKE profile. An IKE keychain specified earlier has a higher
priority. To give an IKE keychain a higher priority, you can configure this command for the keychain. For
example, suppose you configured IKE keychain A before configuring IKE keychain B, and you configured
the peer ID 2.2.0.0/16 for IKE profile A and the peer ID 2.2.2.0/24 for IKE profile B. For peer 2.2.2.2,
IKE keychain A is preferred because IKE profile A was configured earlier. To use IKE profile B for the peer,
you can use this command to restrict the application scope of IKE keychain B to address 2.2.2.2.
Examples
# Create IKE keychain key1.
<Sysname> system-view
[Sysname] ike keychain key1
# Specify that IKE keychain key1 be applied only to the interface with the IP address 2.2.2.2 in VPN
vpn1.
[sysname-ike-keychain-key1] match local address 2.2.2.2 vpn-instance vpn1
match local address (IKE profile view)
Use match local address to specify a local interface or IP address that an IKE profile can be applied to.
Use undo match local address to restore the default.
Syntax
match local address { interface-type interface-number | { ipv4-address | ipv6 ipv6-address }
[ vpn-instance vpn-name ] }
undo match local address
Default
An IKE profile can be applied to any local interface or IP address.
Views
IKE profile view
390
To Next Page
Loading...
Need help?
General
