HP 5920 User Manual

Field Descri
p
tion
State Whether the IPsec transform set is complete.
Encapsulation mode Encapsulation mode used by the IPsec transform set: transport or tunnel.
Transform
Security protocols used by the IPsec transform set: AH, ESP, or both. If both
configured, IPsec uses ESP before AH. protocols are
AH protocol AH settings.
ESP protocol ESP settings.
Integrity Authentication algorithm used by the security protocol.
Encryption Encryption algorithm used by the security protocol.
Related c
ipsec transform-set
display ipsec tunnel
Use display ipsec tunnel to display information about IPsec tunnels.
Syntax
display ipsec tunnel { brief | count | tunnel-id tunnel-id }
Views
Predefine
ork-operator
Paramete
unnels.
el-id: Specifies an IPsec tunnel by its ID. The value range is 0 to 4294967295.
Usage gu
o
dpoints (such as two security gateways). Such a secure channel is usually called an IPsec tunnel.
Examples
nnels.
active
ommands
Any view
d user roles
network-admin
netw
rs
brief: Displays brief information about IPsec t
count: Displays the number of IPsec tunnels.
tunnel-id tunn
idelines
IPsec is a Layer 3 VPN technology that transmits data in a secure channel established between tw
en
# Display brief information about all IPsec tu
<Sysname> display ipsec tunnel brief
----------------------------------------------------------------------------
Tunn-id Src Address Dst Address Inbound SPI Outbound SPI Status
----------------------------------------------------------------------------
0 -- -- 1000 2000
3000 4000
329

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English