HP 5920 User Manual

Field Descri
p
tion
802.1X unicast-trigger is enabled Specifies whether unicast trigger is enabled on the port.
Periodic reauthentication is disabled
Specifies whether periodic online user re-authentication is enabled on
the port.
The port is an authenticator Role of the port.
Authenticate mode is Auto
Authorization state of the port, which can be Force-Authorized, Auto,
or Force-Unauthorized.
Port access control type is
MAC-based
Access control method of the port.
MAC-based—MAC-based access
control.
• Port-based—Port-base access control.
802.1X multicast-trigger is enabled Specifies whether the 802.1X multicast-trigger function is enabled.
Mandatory authentication domain Mandatory authentication domain on the port.
Max online users is 256 Maximum number of concurrent 802.1X users on the port.
EAPOL Packets Number of sent (Tx) and received (Rx) EAPOL packets.
Sent EAP Request/Identity Packets Number of sent EAP-Request/Identity packets.
EAP Request/Challenge Packets Number of sent EAP-Request/Challenge packets.
EAP Success Packets Number of sent EAP Success packets.
Fail Packets Number of sent EAP-Failure packets.
Received EAPOL Start Packets Number of received EAPOL-Start packets.
EAPOL LogOff Packets Number of received EAPOL-LogOff packets.
EAP Response/Identity Packets Number of received EAP-Response/Identity packets.
EAP Response/Challenge Packets Number of received EAP-Response/Challenge packets.
Error Packets Number of received error packets.
Authenticated user MAC address User that has passed 802.1X authentication.
Controlled Users Number of authenticated users on the port.
dot1x
Use dot1x to enable 802.1X globally or on the specified port.
Use undo dot1x to disable 802.1X globally or on the specified port.
Syntax
dot1x
undo dot1x
Default
802.1X is neither enabled globally nor enabled for any port.
Views
System view, Ethernet interface view
95

HP 5920 Specifications

General

Brand	HP
Model	5920
Category	Switch
Language	English