EasyManuals Logo
Home>HP>Server>ProLiant ML370 Generation 4

HP ProLiant ML370 Generation 4 User Manual

HP ProLiant ML370 Generation 4
317 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #264 background imageLoading...
Page #264 background image
264 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
1764-Slot X Drive Array - Capacity Expansion Process is
Temporarily Disabled...
(followed by one of the following)
...Expansion will resume when Array Accelerator has been reattached.
Expansion will resume when Array Accelerator has been replaced.
Expansion will resume when Array Accelerator RAM allocation is successful.
Expansion will resume when Array Accelerator battery reaches full charge.
Expansion will resume when automatic data recovery has been completed.
Audible Beeps: None
Possible Cause: The capacity expansion process has been temporarily disabled.
Action: Follow the action that is displayed onscreen to resume the capacity
expansion process.
1768-Slot X Drive Array - Resuming Logical Drive Expansion
Process
Audible Beeps: None
Possible Cause: Power was lost while a logical expansion operation was
performed. A controller reset or power cycle occurs while array expansion is in
progress.
Action: No action is required.
1769-Slot X Drive Array - Drive(s) Disabled Due to Failure During
Capacity Expansion
...Select F1 to continue with logical drives disabled. Select F2 to accept data loss and to re-
enable logical drives.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant ML370 Generation 4 and is the answer not in the manual?

HP ProLiant ML370 Generation 4 Specifications

General IconGeneral
BrandHP
ModelProLiant ML370 Generation 4
CategoryServer
LanguageEnglish

Related product manuals