42 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
4. Snap the tab into place to secure the power cord.
5. Connect the power cord to the AC power source.
WARNING: To reduce the risk of electric shock or damage
to the equipment:
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
•
•
•
Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
Unplug the power cord from the power supply to disconnect
power to the equipment.
Do not route the power cord where it can be walked on or pinched
by items placed against it. Pay particular attention to the plug,
electrical outlet, and the point where the cord extends from the
server.
Installing the server into the rack
Follow the steps in this section if you are installing the server into a rack with
square holes. If you are installing the server into a rack with round holes, order
the appropriate rack installation option kit, and then refer to the installation
instructions that ship with the option kit for more information.
To Next Page
Loading...
Need help?
General