iSCSI login PDU received with an incorrect
initiator task tag for a session which is partially
logged in. This would occur if a login PDU
other than the initial login PDU used an initiator
task tag which was different than the initiator
task tag provided in the initial login PDU.
ErrorApp
QLIS_LoginPduContinue:
CONN_STATE_IN_LOGIN, Un-
known InitTaskTag
41272
iSCSI login PDU was received with a target
session identifying handle (TSIH) out of range.
This would occur if the iSCSI initiator attempt-
ing the login failed to used the TSIH value
provided in the Target Login Response PDU
(router is target) in subsequent login PDUs.
ErrorApp
QLIS_LoginPduContinue:
TSIH 0x%x out of range
41283
iSCSI login PDU was received with an invalid
TSIH value. The TSIH is invalid because there
is no session with that TSIH value. This would
occur if the iSCSI initiator attempting the login
failed to used the TSIH value provided in the
target login response PDU (router is target) in
subsequent login PDUs.
ErrorApp
QLIS_LoginPduContinue:
Session does not exist,
invalid TSIH 0x%x
41284
iSCSI login rejected due to a CHAP authentic-
ation error.
ErrorApp
QLIS_LoginPduContinue:
Session does not exist,
invalid TSIH 0x%x
41353
iSCSI login rejected due to a CHAP key error.ErrorApp
QLIS_LoginPduContinue:
Unexpected CHAP key detec-
ted
41354
Failed to allocate an object for Set Port Info
IOCTL processing: PortType: 0 = FC, 1 = iSC-
SIPortId: 0 = FC1 or iSCSI1(GE1), 1 = FC2 or
iSCSI2 (GE2)
ErrorApp
QLBI_SetPortInfo:
QLUT_AllocatePortalObject
failed (PortType 0x%x,
PortId 0x%x)
41508
Inquiry command failed. The Inquiry command
was issued by the router as part of its discovery
process.
ErrorApp
QLBI_GetLunInfo: INQUIRY
failed, TPB status 0x%x
41626
Pass-Through command for Inquiry command
for page 83 failed. The Inquiry command was
issued by the router as part of its discovery
process.
ErrorApp
QLBI_GetLunInfo: INQUIRY
failed, TPB status 0x%x
41629
Pass-Through command for Read Capacity
command failed. The Read Capacity command
was issued by the router as part of its discovery
process.
ErrorApp
QLBI_Passthru: Invalid
data length %d bytes
41635
Read Capacity command failed. The Read
Capacity command was issued by the router
as part of its discovery process.
ErrorApp
QLBI_GetLunInfo: INQUIRY
failed, TPB status 0x%x
41636
Pass-Through command issued by management
application (such as GUI) was aborted.
ErrorApp
QLBI_GetLunInfo: INQUIRY
failed, TPB status 0x%x
41696
Pass-Through command issued by management
application (such as GUI) failed due to invalid
command descriptor block (CDB) length.
ErrorApp
QLBI_Passthru: Invalid
CDB length %d bytes
41700
MPX200 Multifunction Router 211
To Next Page
Loading...
Need help?
General