5
5-59
Resetting the power liftgate
To reset the power liftgate:
1. With the vehicle turned off or on, put
the gear in P (Park).
2. Press the power liftgate open/close
inner button and outer button
simultaneously until a chime sounds.
3. Slowly close the liftgate manually.
4. Press the power liftgate open/close
outer button. The liftgate opens with a
chime sound.
Wait until the liftgate fully opens to
complete resetting. If the liftgate stops
before it is fully open, resetting cannot
be completed.
• If the power liftgate is not reset after
the vehicle battery is disconnected or
discharged, or the power liftgate fuse is
blown, the power liftgate may not
operate normally.
• If the power liftgate does not operate
properly after the above procedure,
have your vehicle inspected by an
authorized HYUNDAI dealer.
Emergency liftgate safety
release
2C_EmergencyPowerTailgateOpen
To unlock and open the liftgate manually
from inside the cargo area, perform the
following:
1. Insert a long, flat object, such as a key
into the opening at the bottom of the
liftgate.
2. Slide the latch in the direction of the
arrow to unlock the liftgate.
3. Push the liftgate open.
• Never allow anyone to occupy the
liftgate of the vehicle at any time. The
cargo area is a very dangerous location
in the event of a collision because it is
part of the vehicle’s crush zone.
• Use the release lever for emergencies
only.
Hyundai_SX2_en_US.book Page 59
To Next Page
Loading...
Need help?
General
