5
5-97
(3) Select the front windshield defroster.
(4) The outside (fresh) air and air
conditioning is selected
automatically.
Automatic climate control
system
To defog inside windshield
2C_InsideDefrostProcedure
(1) Select the desired fan speed.
(2) Select the desired temperature.
(3) Press the defroster button ( )
(4) The air conditioning turns on
according to the detected ambient
temperature, the outside (fresh) air
mode and higher fan speed are
selected automatically.
If the air conditioning, outside (fresh) air
mode and higher fan speed are not
selected automatically, adjust the
corresponding switch.
If the defrost switch is selected, the fan
speed increases.
To defrost outside windshield
2C_InsideDefrostProcedure_2
(1) Set the fan speed to the highest
position.
(2) Set the temperature to the hottest (HI)
position.
(3) Press the defroster button ( )
(4) The air conditioning turns on
according to the detected ambient
temperature and the outside (fresh)
air mode is selected automatically.
If the defrost switch is selected, lower fan
speed is adjusted to higher fan speed.
Hyundai_SX2_en_US.book Page 97
To Next Page
Loading...
Need help?
General
