Driver Assistance System
7-50
Safe Exit Warning malfunction
and limitations
Safe Exit Warning malfunction
2C_DriverAssistanceMalfunction
When Safe Exit Warning is not working
properly, the “Check Driver Assistance
system.” warning message will appear on
the instrument cluster for several
seconds, and the master warning light ( )
will appear on the instrument cluster. If
this occurs, have the vehicle inspected by
an authorized HYUNDAI dealer.
2C_CheckSideViewMirrorWarningLightInfo
When the side view mirror warning light is
not working properly, the “Check side
view mirror warning light” warning
message will appear on the instrument
cluster for several seconds, and the
master warning light ( ) will appear on
the instrument cluster. If this occurs, have
the vehicle inspected by an authorized
HYUNDAI dealer.
Safe Exit Warning disabled
2C_DriverAssistanceDisabledRadar
When the rear bumper around the rear
corner radar or sensor is covered with
foreign material, such as snow or rain, or
installing a trailer or carrier, it can reduce
the detecting performance and
temporarily limit or disable Safe Exit
Warning.
If this occurs, the “Driver Assistance
system limited. Radar blocked.” warning
message will appear on the instrument
cluster.
Safe Exit Warning will operate properly
when such foreign material or trailer, etc.,
is removed, and then the vehicle is
restarted.
If Safe Exit Warning does not operate
properly after it is removed, have the
vehicle inspected by an authorized
HYUNDAI dealer.
• Even though the warning message
does not appear on the instrument
cluster, Safe Exit Warning may not
properly operate.
• Safe Exit Warning may not properly
operate in an area (for example, open
terrain) where any objects are not
detected right after the vehicle is
turned on, or when the detecting
sensor is blocked with foreign material
right after the vehicle is turned on.
Hyundai_SX2_en_US.book Page 50
To Next Page
Loading...
Need help?
General
