Emergency Situations
8-18
Jack label
1C_JackLabel
(1) Model Name
(2) Maximum allowable load
(3) Always apply the parking brake before using a jack.
(4) Always turn off the engine before using a jack.
(5) Never put any portion of your body under the vehicle supported by a jack.
(6) Only use the designated jacking locations on the frame.
(7) When supporting the vehicle, have the base plate of the jack flat on the ground under
the lifting point.
(8) Shift into R (Reverse) gear with manual transmission or shift the gear to the P (Park)
position on vehicles with automatic transmission, dual clutch transmission, and
intelligent variable transmission.
(9) Do not jack the vehicle on an incline. Only jack the vehicle on a firm level ground.
(10)Jack manufacturer
(11) Production date
(12)Representative company and address
The actual Jack label in the vehicle may differ from the illustration.
For more detailed specifications, refer to the label attached to the jack.
Hyundai_SX2_en_US.book Page 18
To Next Page
Loading...
Need help?
General
