5
5-109
• The wireless charging process may
temporarily stop, when temperature
abnormally increases inside the
wireless smartphone charging system.
The wireless charging process does not
restart, until the temperature falls.
• The wireless charging process may
temporarily stop when there is any
metallic item, such as a coin, between
the wireless smartphone charging
system and smartphone.
• For some manufacturer’s smart
phones, the system may not warn you
even though the smart phone is left on
the wireless charging unit. This is due to
the particular characteristic of the
smart phone and not a malfunction of
the wireless charging.
• When charging some smartphones
with a self-protection feature, the
wireless charging speed may decrease
and the wireless charging may stop.
• If the smartphone has a thick case, it
may not charge.
• Some magnetic items such as credit
cards, phone cards, or transit cards may
be damaged if left with the smartphone
during the charging process.
• If the smartphone is not completely
contacting the charging pad, wireless
charging may not operate properly.
• If the Engine Start/Stop button is in the
OFF position, the charging also stops.
• When any smartphone without a
wireless charging function or a metallic
object is placed on the charging pad, a
small noise may sound. This small
sound because the vehicle discerns
compatibility of the object placed on
the charging pad. It does not affect
your vehicle or the smartphone.
• Some smartphones may not be able to
charge depending on the internal
structure of the smartphone. If this
occurs, try charging the smartphone by
moving it to the left or right side of the
wireless charging pad. However, for
some fold-able smartphones that have
magnets inside the smartphone, try
charging the smartphone while holding
it close to the left side of the wireless
charging pad.
Some magnetic items like credit cards,
phone cards or rail tickets may be
damaged if left with the smartphone
during the charging process.
This device complies with Part 15 of the
FCC rules.
Operation is subject to the following three
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any
interference received, including
interference that may cause undesired
operation.
3. Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the device.
Clock
The clock can be set from the
infotainment system.
Do not attempt to adjust the clock while
driving.
Hyundai_SX2_en_US.book Page 109
To Next Page
Loading...
Need help?
General
