Driving Your Vehicle
6-34
Parking brake warning light
WL_BreakWarningLamp
This light illuminates when the Parking
Brake is applied with the Engine
Start/Stop button in the START or ON
position.
Before driving, make sure the Parking
Brake is released and the Parking Brake
warning light is OFF.
If the Parking Brake warning light remains
on after the Parking Brake is released
while the engine is running, there may be
a malfunction in the brake system.
If possible, stop driving the vehicle
immediately. If that is not possible, use
extreme caution while operating the
vehicle and only continue to drive the
vehicle until you can reach a safe
location.
Auto hold
Auto Hold maintains the vehicle in a
standstill even though the brake pedal is
not depressed after the driver brings the
vehicle to a complete stop by depressing
the brake pedal.
When the vehicle is restarted, the last
setting for Auto Hold is applied.
To apply:
Type A
2C_AutoHoldButtonOn
Type B
2C_AutoHoldButtonOn_2
[A] White
1. With the driver's door, hood, and
liftgate closed, press the AUTO HOLD
switch. The white AUTO HOLD indicator
comes on and the system is in standby.
2. When you stop the vehicle completely
by depressing the brake pedal, Auto
Hold maintains the brake pressure to
hold the vehicle stationary. The
indicator changes from white to green.
The vehicle remains stationary even if
you release the brake pedal.
Hyundai_SX2_en_US.book Page 34
To Next Page
Loading...
Need help?
General
