Driver Assistance System
7-72
• Haptic Warning: Select Setup >
Vehicle > Driver Assistance > Warning
Methods > Haptic Warning from the
settings menu in the infotainment
system to set haptic warning.
• Driving Safety Priority: Select Setup >
Vehicle > Driver Assistance > Warning
Methods > Driving Safety Priority from
the settings menu in the infotainment
system.
If Driving Safety Priority is selected,
the vehicle lowers all other audio
volumes when the warning sounds for
safe driving.
• If you change the Warning Methods,
the Warning Methods of other Driver
Assistance systems may change.
• The Warning Volume and Haptic
Warning cannot be turned off at the
same time. When one of the warning is
turned off the other is activated.
• If the engine is restarted, Warning
Methods will maintain the last setting.
Smart Cruise Control
operation
Operating conditions
Basic function
Smart Cruise Control operates when the
following conditions are satisfied.
• The gear is in D (Drive)
• Your vehicle speed is within the
operating speed range
- 5-120 mph (10-200 km/h): when
there is no vehicle in front
- 0-120 mph (0-200 km/h): when there
is a vehicle in front
• ESC (Electronic Stability Control) or
ABS (Anti-Lock Braking System) is on
Smart Cruise Control does not operate in
the following conditions.
• The driver's door is opened
• Engine RPM is high
• Parking brake is applied
• ESC (Electronic Stability Control) or
ABS (Anti-Lock Braking System) is
controlling the vehicle
• Forward Collision-Avoidance Assist
brake control is operating
• Remote Smart Parking Assist brake
control is operating (if equipped)
When stopped behind another vehicle,
the driver can turn on Smart Cruise
Control while the brake pedal is
depressed.
Operating conditions for Acceleration
Assist
Overtaking Acceleration Assist operates
when the turn signal indicator is turned on
to the left while Smart Cruise Control is
operating, and the following conditions
are satisfied:
• Your vehicle speed is above 40 mph (60
km/h)
• A vehicle is detected in front of your
vehicle
Overtaking Acceleration Assist does not
operate in the following conditions.
• The hazard warning flasher is on
• Vehicle speed is reduced to maintain
distance with the vehicle in front
Hyundai_SX2_en_US.book Page 72