Driver Assistance System
7-52
Manual Speed Limit Assist
settings
Warning Methods
2C_WarningTypeSetInfo_4
The Warning Methods can be set with the
vehicle on.
• Warning Volume: Select Setup >
Vehicle > Driver Assistance > Warning
Methods > Warning Volume from the
settings menu in the infotainment
system to change the warning volume.
If you turn off the Warning Volume, for
your safety, the function may warn you
with a low volume.
• If you change the Warning Methods,
the Warning Methods of other Driver
Assistance systems may change.
• If the engine is restarted, Warning
Methods will maintain the last setting.
• The setting menu may not exist based
on vehicle specification.
Manual Speed Limit Assist
operation
Setting speed limit
1. Press and hold the Driving Assist ( )
button at the desired speed. The Speed
Limit ( ) indicator will appear on the
instrument cluster.
2C_SpeedControlButton
2. Push the + switch up or - switch down,
and release it at the desired speed.
Push the + switch up or - switch down
and hold it. The speed will increase or
decrease to the nearest multiple of 5
(multiple of 10 in km/h) at first, and then
increase or decrease by 5 mph (10
km/h).
2C_SpeedControlSwitch
3. The set speed limit will be displayed on
the instrument cluster.
Hyundai_SX2_en_US.book Page 52
To Next Page
Loading...
Need help?
General
