Convenience Features
5-84
Fan speed control
2C_FanSpeedCont
Turn the knob to the right to increase the
fan speed and airflow. Turn the knob to
the left to decrease fan speed and airflow.
Setting the fan speed control knob to the
“0” position turns off the fan.
Operating the fan speed when the Engine
Start/Stop button is in the ON position
may cause the battery to discharge.
Air conditioning (A/C)
2C_ACOn
Press the A/C button to turn on the air
conditioning system (indicator light ON).
Press the button again to turn off the air
conditioning system.
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside
(fresh) mode.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the desired
speed.
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside
(fresh) mode.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the desired
speed.
5. If desired, turn the air conditioning ON
with the temperature control knob set
to heat in order to dehumidify the air
before it enters into the cabin.
If the windshield fogs up, set the mode to
the or position.
Operation tips
• To help keep dust or unpleasant fumes
from entering the vehicle through the
ventilation system, temporarily set the
air intake control to the recirculation
mode. Be sure to return the control to
the fresh air mode when the irritation
has passed to keep fresh air in the
vehicle. This can help keep the driver
alert and comfortable.
• To prevent interior fog on the
windshield, set the air intake control to
the fresh air position and the fan speed
to the desired position, turn on the air
conditioning system, and adjust the
temperature control to the desired
temperature.
Hyundai_SX2_en_US.book Page 84
To Next Page
Loading...
Need help?
General
