Driver Assistance System
7-48
Safe Exit Warning settings
Safe Exit Warning
2C_ExitSafetySetInfo
With the engine on, select Setup >
Vehicle > Driver Assistance > Driving
Safety > Safe Exit from the Settings menu
to turn on Safe Exit Warning and deselect
to turn off the function.
The driver should always be aware of his
or her surroundings. If “Safe Exit” is
deselected, Safe Exit Warning cannot
assist you.
If the engine is restarted, Safe Exit
Warning will maintain the last setting.
Warning Methods
2C_WarningTypeSetInfo_2
The Warning Methods can be set with the
vehicle on.
• Warning Volume: Select Setup >
Vehicle > Driver Assistance > Warning
Methods > Warning Volume from the
settings menu in the infotainment
system to change the warning volume.
If you turn off the Warning Volume, for
your safety, the function may warn you
with a low volume.
• Driving Safety Priority: Select Setup >
Vehicle > Driver Assistance > Warning
Methods > Driving Safety Priority from
the settings menu in the infotainment
system.
If Driving Safety Priority is selected,
the vehicle lowers all other audio
volumes when the warning sounds for
safe driving.
• If you change the Warning Methods,
the Warning Methods of other Driver
Assistance systems may change.
• If the engine is restarted, Warning
Methods will maintain the last setting.
• The setting menu may not exist based
on vehicle specification.
Hyundai_SX2_en_US.book Page 48
To Next Page
Loading...
Need help?
General
