7
7-101
Camera Settings
2C_RVMParkingDistanceWarningInfo
You can change Rear View Monitor
Display Contents by touching the setup
icon ( ) on the screen while Rear View
Monitor is operating, or selecting Setup >
Vehicle > Driver Assistance > Parking
Safety > Camera Settings from the
Settings menu in the infotainment system
while the engine is on.
In the Display Contents, you can change
settings for Extended Rear View Monitor
and Rear View Parking Lines.
Extended Rear View Monitor
Keeps displaying the rear view when
shifting from R (Reverse) to N (Neutral) or
D (Drive). When exceeding a certain
speed, the rear view stops displaying.
Rear View Parking Lines
If Rear View Parking Lines is selected, the
rear view parking guide lines and rear top
view guide lines will be displayed at the
left side of the infotainment system .
• The horizontal guideline of the Rear
View Parking Guidance shows the
distance of 1.6 ft. (0.5 m), 3.3 ft. (1 m)
and 7.6 ft. (2.3 m) from the vehicle.
• The horizontal guideline of the Rear Top
View Parking Guidance shows the
liftgate opening distance and the
distance of 4.9 ft. (1.5 m) from the
vehicle.
Rear View Monitor operation
Parking/View button
Type A
2C_ParkingViewButton
Type B
2C_ParkingViewButton_2
Hyundai_SX2_en_US.book Page 101
To Next Page
Loading...
Need help?
General
