7
7-111
Rear Cross-Traffic
Collision-Avoidance Assist
settings
Rear Cross-Traffic Safety
2C_RCCASetInfo
With the engine on, select Setup >
Vehicle > Driver Assistance > Parking
Safety > Rear Cross-Traffic Safety from
the settings menu in the infotainment
system to turn on Rear Cross-Traffic
Collision-Avoidance Assist and deselect
to turn off the function.
When the engine is restarted, Rear
Cross-Traffic Collision-Avoidance Assist
always turn on. However, if ‘Off’ is
selected after the engine is restarted, the
driver should always be aware of the
surroundings and drive safely.
Warning Methods
2C_WarningTypeSetInfo_3
The Warning Methods can be set with the
vehicle on.
• Warning Volume: Select Setup >
Vehicle > Driver Assistance > Warning
Methods > Warning Volume from the
Settings menu in the infotainment
system to change the warning volume.
If you turn off the Warning Volume, for
your safety, the function may warn you
with a low volume.
• Haptic Warning: Select Setup >
Vehicle > Driver Assistance > Warning
Methods > Haptic Warning from the
Settings menu in the infotainment
system to set haptic warning.
• If you change the Warning Methods,
the Warning Methods of other Driver
Assistance systems may change.
• The Warning Volume and Haptic
Warning cannot be turned off at the
same time. When one of the warning is
turned off the other is activated.
• If the engine is restarted, Warning
Methods will maintain the last setting.
• The setting menu may not exist based
on vehicle specification.
Hyundai_SX2_en_US.book Page 111
To Next Page
Loading...
Need help?
General
