7
7-85
Navigation-based Smart
if equipped
Cruise Control (NSCC)
Navigation-based Smart Cruise Control
helps maintain appropriate speed
depending on the road conditions by
using information from the navigation
system when driving on highways while
Smart Cruise Control is operating.
• Navigation-based Smart Cruise Control
is available only on controlled access
roads.
- Controlled access roads are roads
with limited entrances and exits that
allow uninterrupted high speed
traffic flow.
- Additional highways may be available
in future navigation system updates.
- Navigation-based Smart Cruise
Control does not operate on
interchanges or junctions.
Highway Auto Curve Slowdown
If vehicle speed is high, Highway Auto
Curve Slowdown function will
temporarily decelerate your vehicle or
limit acceleration to help you drive safely
on a curve based on the curve
information from the navigation.
Navigation-based Smart
Cruise Control settings
2C_NSCCSetInfo
With the engine on, select Setup >
Vehicle > Driver Assistance > Driving
Convenience > Auto Highway Speed
Change from the Settings menu to turn
on Navigation-based Smart Cruise
Control and deselect to turn off the
function.
When there is a problem with
Navigation-based Smart Cruise Control,
the function cannot be set from the
Settings menu.
Navigation-based Smart
Cruise Control operation
Operating conditions
Navigation-based Smart Cruise Control is
ready to operate if all of the following
conditions are satisfied:
• Smart Cruise Control is operating
• Driving on main roads of highways (or
motorways)
For more information on how to operate
Smart Cruise Control, refer to the “Smart
Cruise Control (SCC)” section in this
chapter.
Available highway
(Controlled access road)
USA
Select Interstate
Highway and U.S.
(Federal) and State
Highways
Canada
Select Provincial and
Territorial Highways
Hyundai_SX2_en_US.book Page 85
To Next Page
Loading...
Need help?
General
