5
5-89
2C_SolarRadiationSensor
Never place anything near the sensor to
ensure better control of the heating and
cooling system.
Manual heating and air
conditioning
1. Start the engine.
2. Set the mode to the desired position.
For improving the effectiveness of
heating and cooling, select:
• Heating:
• Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to the outside
(fresh) air position.
5. Set the fan speed control to the desired
speed.
6.If air conditioning is desired, turn on the
air conditioning system.
7. Press the AUTO button to convert to full
automatic control of the system.
Mode selection
2C_AirconModeSelection
The mode selection switch controls the
direction of the air flow through the
ventilation system.
Hyundai_SX2_en_US.book Page 89
To Next Page
Loading...
Need help?
General
