Driver Assistance System
7-18
• If the radar or around the radar has
been damaged or impacted in any way,
Forward Collision-Avoidance Assist
may not properly operate even though
a warning message does not appear on
the instrument cluster. Have the
vehicle inspected by an authorized
HYUNDAI dealer.
• Use only genuine parts to repair or
replace a damaged front radar cover.
Do not apply paint to the front radar
cover.
• If a trailer or hitch mounted carrier is
attached, it may adversely affect the
performance of the Forward
Collision-Avoidance Assist.
Forward Collision-Avoidance
Assist settings
Forward Safety
2C_ForwardSafetySetInfo
With the engine on, select Setup >
Vehicle > Driver Assistance > Driving
Safety from the settings menu in the
infotainment system to set whether to
use each function.
• If “Forward Safety” is selected,
Forward Collision-Avoidance Assist will
warn the driver with a warning
message, an audible warning
depending on the collision risk levels.
Braking assist will be applied
depending on the collision risk levels. If
“Forward Safety” is deselected,
Forward Safety will turn off. The
warning light ( ) will illuminate on the
instrument cluster.
When the engine is restarted, Forward
Collision-Avoidance Assist will always
turn on. However, if "Forward Safety" is
deselected, the driver should always be
aware of the surroundings and drive
safely.
The setting for Forward Safety includes
‘Basic function’, ‘Junction Turning’, and
'Direct Oncoming'.
Driving Safety systems include Forward
Collision-Avoidance Assist, Lane Keeping
Assist, Blind-Spot Collision-Avoidance
Assist, and Driver Attention Warning.
Forward Safety Warning Timing
2C_ForwardSafetyWarningTimingSetInfo
With the engine on, select Setup >
Vehicle > Driver Assistance > Driving
Safety > Forward Safety Warning Timing
settings menu in the infotainment system
to change the initial warning activation
time for Forward Collision-Avoidance
Assist. The warning time can be set to
either Standard or Late
Hyundai_SX2_en_US.book Page 18