7
7-95
Highway Driving Assist
operation
Basic function
Displaying operating status
You can see the status of the Highway
Driving Assist operation in the Driving
Assist view on the instrument cluster.
Refer to the “View modes” section in
chapter 4.
Highway Driving Assist will be displayed
as below depending on the status of the
function.
Operating state
2C_HDAActiveIndicatorInfo
Standby state
2C_HDAReadyIndicatorInfo
1. Highway Driving Assist indicator,
whether there is a vehicle ahead and
the selected distance level are
displayed.
• Highway Driving Assist indicator
( )
- Green HDA: Operating state
- Grey HDA: Standby state
- White HDA blink: Accelerator
depressed state
2. Set speed
3. Lane Following Assist indicator
4. Whether there is a vehicle ahead and
the selected headway
5. Whether the lane is detected or not
• For more information on the display,
refer to the “Smart Cruise Control
(SCC)” and “Lane Following Assist
(LFA)” sections in this chapter.
• The images and colors in the
instrument cluster may differ
depending on the instrument cluster
type or theme selected from the
settings menu.
Highway Driving Assist operation
Highway Driving Assist operates when:
• Driving on the main road of highways,
and turning on Highway Driving Assist
by pressing the Driving Assist button
• Entering the main road of highways
while Lane Following assist and Smart
Cruise Control are operating
Hyundai_SX2_en_US.book Page 95
To Next Page
Loading...
Need help?
General
