Driving Your Vehicle
6-44
Downhill Brake Control disabled. Control
vehicle speed.
2C_DBCDisabledInfo
If Downhill Brake Control is not working
properly, this warning message appears
on the cluster display and you may hear a
warning sound. If this occurs, control the
vehicle speed by depressing the brake
pedal.
Always turn off Downhill Brake Control on
normal roads. The system might activate
inadvertently from the standby mode
when driving through speed bumps or
making sharp curves.
• Downhill Brake Control may not
deactivate on steep inclines even
though the brake pedal or accelerator
pedal is depressed.
• Downhill Brake Control may not always
maintain vehicle speed at a certain
speed.
• Downhill Brake Control does not
operate when:
- The gear is in P (Park).
- ESC is activated.
• Noise or vibration may occur from the
brakes when Downhill Brake Control is
activated.
• The rear stop light comes on when
Downhill Brake Control is activated.
Brake Assistant System (BAS)
The Brake Assistant System provides
additional pressure when the brake pedal
is momentarily and strongly depressed in
a situation sudden braking is required
while driving.
The Brake Assistant System reduces the
time for ABS (Anti-Lock Brake System)
control to enter and consequently
reduces the braking distance, by
providing additional pressure up to the
point of ABS intervention.
Hyundai_SX2_en_US.book Page 44
To Next Page
Loading...
Need help?
General
