Page 42
AquaLink
®
Touch™ Owner's Manual
10.17.2 Customize Service Phone
SYSTEM SETUP > PRODUCT INFO
From the PRODUCT INFO screen, touch the
CUSTOMIZED SERVICE PHONE to view the screen
below. On this screen touch the CLEAR button to
remove existing phone number. Use the numeric
keyboard to enter new phone number. Touch the
ENTER button to save new phone number.
om
Menu OneTouch Help Back Status
Photos
Power
Product Info
7 8 9
4 5 6
1 2 3
0
Clear Enter
000-000-0000
Thu January 1, 2009 3:03 PM
10.18 Air Temperature
Use the Air Temperature menu to turn the air
temperature display on or off.
10.18.1 To Set Up Air Temperature
MENU > SYSTEM SETUP > AIR TEMP
From the SYSTEM SETUP screen, touch the AIR TEMP to
enable the air temperature.
H
m
Menu OneTouch Help Back Status
Photos
Power
System Setup
Dusk
Setup
Heat
Pump
PLockOut
Enabled
Air Temp
Enabled
HP Priority
N/A
DST
Enabled
Temp
Calibrate
Slr Priority
Disabled
All Off
Time
Product
Info
Degrees
Fº
Assign
JVAs
Thu January 1, 2009 3:03 PM
10.19 Temp Calibration
This menu allows adjustment of the temperature that
is displayed on the AquaLink RS. The temperature can
only be adjusted up four (4) degrees Fahrenheit or down
four (4) degrees Fahrenheit.
10.19.1 To Set Up Calibration
MENU > SYSTEM SETUP > TEMP CALIBRATE
From the SYSTEM SETUP screen, touch the TEMP
CALIBRATE button to display the WATER TEMP
CALIBRATE screen. Touch the POOL or SPA button
and use the arrow keys to set values.
NOTE If the temperature is off by more than four
(4) degrees, contact your local service
representative.
Hom
Menu OneTouch Help Back Status
Photos
Power
Water Temp Calibrate
Pool
80º
Spa
100º
Adjust Temp +/- 4º
+2
Thu January 1, 2009 3:03 PM
10.20 Degrees C/F
The Degrees C/F menu allows you to change the
AquaLink RS temperature display from Fahr en heit to
Celsius or vice versa. When changing from Fahrenheit
to Celsius, you will have to re-enter the temperature
settings.
To Next Page
Loading...
Need help?
General
