Dual rates are available for the aileron, elevator and rudder
channels of your R/C glider
. The amount of travel is adjustable
from 0
-
12
5%; exponential is adjustable from 0% (LIN) to 1
00% in
1% increments. The factor
y setting, or default value, for both the
0 and 1 switch positions is 1
00%. Either switch position may be
selected as the low or high rate by placing the switch in the
desired position and adjusting the value accordingly
.
Dual rates can be defined as the ability to var
y the travel or
throw rate of a ser
vo from a switch. Due to dif
fering travel rates,
you will find that the sensitivity of the control either increases or
decreases accordingly
. A higher rate, or travel, yields a higher
overall sensitivity
. Y
ou may find it easier to think of the Dual Rate
Function as double-rated or half-rates.
The Dual Rate Function works in conjunction with the Exponential
Function to allow you to precisely tailor your control throws.
In Function Mode, use the UP or DN key to select Dual Rate and
access by pressing the UP and DN keys simultaneously
.
AILE
Aileron
ELEV
Elevator
RUDD
Rudde