.
2
Function Mode
From Normal Display
, press the UP and DN keys simultaneously
to enter the Function Mode. In this mode, by using the UP or DN
keys, the desired functions can be selected. When channel
selection or an additional function change is desired, use the
CH keys or Select key
. For example, Dual Rate Function is
selected and the elevator channel is displayed by pressing the
UP key once; the function is changed to the next mode, Reverse
Switch, but the channel is still displayed as elevator
.
Function Mode Flowchar
t
Infor
mation per
taining to each function is explained on the page
number listed next to the function name. Functions will appear
on the screen in the same order they are shown on the flow
char
t below:
Therefore, by scrolling through the program, you can adjust
each function related to the elevator channel quickly and easily
.
T
o
Access The Function Mode
1.
Switch the power switch to the ON (upper) position.
2.
Press the UP and DN keys simultaneously
.
3.
Use either the UP or DN keys to scroll through the menu and
access the appropriate function.
P
To Next Page
Loading...
Need help?
General
