JR XP810-3 User Manual

www.modelflight.com.au – World’s best source of JR products
4 . 9 Fla
p
to Aileron Mixin
g
, cont
Indicates the
function being
selected:
↓
Rate
↓
SW
SW OFF appears when the Flap Mixing
is in the middle or lower position
Flap to Aileron Mixing V alue (± 125%)
Indicates current Mixing Switch acitvated
Fla
p
Offset
V
alue
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Press the DN and Select key
s
simultaneously to access th
e
Function Mode List Dis
p
la
y
To Aileron to Rudde
r
UP
DN SELECT CH CH CLEAR
Press to return the
Mixin
g
function
To Flap to Elevato
r
Mixin
g
function
Function Selection
⌫ Rates ⌫ Switch ⌫ Offset
A
t rate, press to
increase/decrease
Mixing V alue (± 125%)
At switch, press to
change switch
selection
Mixing
V
alue to zero or
to return the active
Mixin
g
Switch ON
4
.
1
0 Aileron to Rudder Mixin
g
(
Function Mode
)
This mixing gives rudder actuation with aileron operation. When
opposite mixing direction is required, press the - key and
increase the mixing value to minus direction.
In Function Mode, use the UP and DN keys to select Aileron to
Rudder Mixing and access by pressing the UP and DN keys
simultaneously .
Selection of Operational Switch
The lever switch position for Mixing Function ON/OFF is listed
at right and can be accessed with the + or - keys. When the
applicable switch is in the OFF position, SW OFF flashes in the
left upper corner and increase or decrease mixing value is not
applicable. Press the CLR key to set ON.
ON Always On
MIX Mixing Switch Is For ward
FLP-D Flap Switch Down Position
FLP-U Flap Switch Up Position
GLID 120

JR XP810-3 Specifications

General

Brand	JR
Model	XP810-3
Category	Remote Control
Language	English