EasyManuals Logo
Home>Juniper>Gateway>SRX110 H2

Juniper SRX110 H2 User Manual

Juniper SRX110 H2
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
SRX110 Services Gateway Integrated VDSL2 Interface Overview
Very-high-bit-rate digital subscriber line (VDSL) technology is part of the xDSL family of
modem technologies. It provides fast data transmission over a single flat untwisted or
twisted pair of copper wires.
VDSL lines connect service provider networks and customer sites to provide
high-bandwidth applications (Triple Play services) such as high-speed Internet access,
telephone services such as voice over IP (VoIP), high-definition TV (HDTV), and interactive
gaming services over a single connection. VDSL2 is an enhancement to VDSL and permits
the transmission of asymmetric (half-duplex).
VDSL2 uses:
•
RJ-11 connector to connect to the VDSL/ADSL-POTS port.
•
RJ-45 connector to connect to the VDSL/ADSL-ISDN port.
The services gateway supports integrated VDSL2. The integrated VDSL2 carries the
Ethernet backplane. On the SRX Series Services Gateway, integrated VDSL2 provides
ADSL backward compatibility.
Integrated VDSL2 is compatible with the ITU-T G.993.2 (VDSL2) standard.
For more information, see the Interfaces for Security Devices.
Related
Documentation
SRX110 Services Gateway Integrated VDSL2 Interface Key Features on page 6•
• SRX110 Services Gateway Integrated VDSL2 Interface Supported Profiles on page 7
• SRX110 Services Gateway Integrated VDSL2 Interface LEDs on page 22
• Configuring the Integrated VDSL2 Interface on the SRX110 Services Gateway on page 103
SRX110 Services Gateway Integrated VDSL2 Interface Key Features
The following features are supported on integrated VDSL2:
•
ADSL/ADSL2/ADSL2+ backward compatibility with POTS supporting Annex-A
(Annex-M) and ISDN supporting Annex-B
•
Packet Mode Transfer (PTM) or Ethernet in the First Mile (EFM) (802.3ah)
•
Operation, Administration, and Maintenance (OAM) support for ADSL/ADSL2/ADSL2+
mode
•
Asynchronous Transfer Mode (ATM) quality of service (QoS) (supported only when
the VDSL2 interface is operating in ADSL2 mode)
•
Multilink Point-to-Point Protocol (MLPPP) (supported only when the VDSL2 interface
is operating in ADSL2 mode)
Copyright © 2015, Juniper Networks, Inc.6
SRX110 Services Gateway Hardware Guide for H2 Model Numbers

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX110 H2 and is the answer not in the manual?

Juniper SRX110 H2 Specifications

General IconGeneral
BrandJuniper
ModelSRX110 H2
CategoryGateway
LanguageEnglish

Related product manuals