Juniper SRX110 H2 User Manual

CHAPTER 7
Installation Overview
•
Installation Overview for the SRX110 Services Gateway on page 47
•
Required Tools and Parts for Installing and Maintaining the SRX110 Services
Gateway on page 48
•
SRX110 Services Gateway Autoinstallation Overview on page 49
Installation Overview for the SRX110 Services Gateway
After you prepare your installation site, you are ready to unpack and install the services
gateway. It is important to perform the installation procedure as indicated in
Table 27 on page 47.
Table 27: Installation Procedure for the SRX110 Services Gateway
Additional InformationTaskStep
“SRX110 Services Gateway General Safety
Guidelines and Warnings” on page 131
Review the safety guidelines.1
Site Preparation Checklist for the SRX110 Services
Gateway
Verify that you have prepared your
site for the installation of the
services gateway in accordance
with the checklist.
2
“Unpacking the SRX110 Services Gateway” on
page 51
Unpack the services gateway and
verify that all parts are received.
3
Preparing the SRX110 Services Gateway for
Rack-Mount, Desk-Mount, and Wall-Mount
Installation
Prepare the services gateway for
installation.
4
“Installing the SRX110 Services Gateway in a Rack”
on page 59
“Installing the SRX110 Services Gateway on a Desk”
on page 63
“Installing the SRX110 Services Gateway on a Wall”
on page 65
Install the services gateway.5
47Copyright © 2015, Juniper Networks, Inc.

Juniper SRX110 H2 Specifications

General

Brand	Juniper
Model	SRX110 H2
Category	Gateway
Language	English