CHAPTER 8
Unpacking the Services Gateway
•
Unpacking the SRX110 Services Gateway on page 51
•
Verifying Parts Received with the SRX110 Services Gateway on page 51
Unpacking the SRX110 Services Gateway
The SRX110 Services Gateway is shipped in a cardboard carton. The carton also contains
an accessory box and the SRX110 Services Gateway Quick Start.
NOTE: The device is maximally protected inside the shipping carton. Do not
unpack it until you are ready to begin installation.
To unpack the services gateway:
1. Open the box in which the device is shipped.
2. Verify the parts received against the packing list in Verifying Parts Received with the
SRX110 Services Gateway.
3. Store the shipping box and packing material in case you need to return or move the
device at a later time.
Related
Documentation
Required Tools and Parts for Installing and Maintaining the SRX110 Services Gateway
on page 48
•
• Preparing the SRX110 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation
• Installation Overview for the SRX110 Services Gateway on page 47
Verifying Parts Received with the SRX110 Services Gateway
The services gateway shipment package contains a packing list that includes all parts
and accessories available with the device. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order.
If any part is missing, contact your Juniper Networks customer service representative.
51Copyright © 2015, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
