Section 10: Limits, digital I/O, and scanning Model 6517B Electrometer Reference Manual
10-12 6517B-901-01 Rev. C / August 2015
11. The next message asks if you wish to store the readings in the buffer. If you select YES, the
number of readings that are stored in the buffer are displayed. Note that the buffer size is limited
(see Buffer (data store) (on page 8-1) for details).
12. The last message prompts you to start the external scan by pressing ENTER. The selected
trigger source controls the scan. Note that the TRIG key is always active to allow you to step
through the scan.
To Next Page
Loading...
Need help?
General
