To Next Page

To Previous Page

Section 14: SCPI command reference Model 6517B Electrometer Reference Manual

14-144 6517B-901-01 Rev. C / August 2015

:ELEMents <item list>

This command is used to select elements for the buffer.

Usage

TRACe:ELEMents <item list>

:ELEMents?

 TSTamp: includes time stamp

 HUMidity: includes humidity

 CHANnel: Includes channel number

 ETEMperature: Includes external temperature

 VSOurce: Includes V-source

 NONE: None of the above elements

Items in the list must be separated by commas.

Details

READing, STATus, RNUMber (reading number) and UNIT are always enabled for the buffer and

are included in the response for the query (:ELEMents?).

This command is used to include additional elements for each buffer reading. The :ELEMents

<item list> command (under FORMat subsystem (on page 14-50)) provides a detailed

description for each element.

Also see

:ELEMents <item list> (on page 14-53)

:TRIGger subsystem

The trigger subsystem is made up of a series of commands and subsystems to configure the three

layers of the trigger model (see Trigger models for more information) These commands and

subsystems are summarized in :TRIGger command summary (on page 14-26).

Keithley 6517B Reference Manual

Other manuals for Keithley 6517B