Keithley 6517B Reference Manual

Section 14: SCPI command reference Model 6517B Electrometer Reference Manual
14-32 6517B-901-01 Rev. C / August 2015
Command Description Default parameter SCPI
:STOP?
Query stop voltage
:STEP <NRf>
Specify step voltage; -1000 to 1000 +1 V
:STEP?
Query step voltage
:STIME <NRf>
Specify step time; 0 to 9999.9 (sec) 1 sec
:STIME?
Query step time
:UNIT command summary
Command Description Power-up defaults
:UNIT
:TEMPerature <name>
:TEMPerature?
Select temperature units (C, CEL, F,
FAR, K)
Query temperature units
C
SCPI command subsystems
CALCulate subsystem
The commands in this subsystem are used to configure and control the three Calculate subsystems and are
summarized in the CALCulate command summary (on page 14-7).
CALCulate[1]
This subsystem is used to configure and control the polynomial and percent math calculations.

Keithley 6517B Specifications

General

Brand	Keithley
Model	6517B
Category	Measuring Instruments
Language	English