To Next Page

To Previous Page

Model 6517B Electrometer Reference Manual Section 14: SCPI command reference

6517B-901-01 Rev. C / August 2015 14-81

[:STATe]

This command is used to control the median volts, amps, ohms, and coulombs.

Usage

[:STATe]

[:SENSe[1]]:VOLTage[:DC]:MEDian[:STATe]

[:SENSe[1]]:CURRent[:DC]:MEDian[:STATe]

[:SENSe[1]]:RESistance:MEDian[:STATe]

[:SENSe[1]]:CHARge:MEDian[:STATe]

[STATe]?

 1 or ON: Enable median filter

 0 or OFF: Disable median filter

Details

This command is used to control (on or off) the median filter. When enabled, the instrument determines and

displays the median reading for the specified number of readings. The :RANK command is used to specify the

number of readings used to determine the median.

Note that the median filter can be used with the average filter. When both of these filters are enabled, each

displayed reading reflects the median for the average readings.

Setting STATe to OFF with AVER:TYPE set to NONE sets AVER:STAT to OFF.

Also see

None

Keithley 6517B Reference Manual

Other manuals for Keithley 6517B