To Next Page

To Previous Page

Section 14: SCPI command reference Model 6517B Electrometer Reference Manual

14-146 6517B-901-01 Rev. C / August 2015

:POFLag <name>

This command is used to control the no-operation-pending flag.

Usage

:INITiate:POFLag <name>

:POFLag?

<name>

 INCLude: Include no-operation-pending flag

 EXCLude: Exclude no-operation-pending flag

Details

This command is used to include or exclude the no-operation-pending flag in the internal process of

determining whether all pending operations of an initiate command are completed.

Also see

*OPC (operation complete) (on page 12-8)

*OPC? (operation complete query) (on page 12-9)

:ABORt

This command is used to abort the operation.

Usage

:ABORt

Details

When this action command is sent, the Model 6517B aborts the operation and returns to the top of

the trigger model. If continuous initiation is disabled, the instrument goes the idle state. If continuous

initiation is enabled, operation continues on into Arm Layer 1.

The abort command resets the source bypasses of the trigger model. If scanning, the scan pointer

resets back to the first channel in the scan list.

Also see

None

Keithley 6517B Reference Manual

Other manuals for Keithley 6517B