Keithley 6517B Reference Manual

Model 6517B Electrometer Reference Manual Section 2: Getting started
6517B-901-01 Rev. C / August 2015 2-21
RESET
Use this menu option to reset the instrument to the bench or GPIB default conditions shown in the
table below. The RESET options are:
 BENCH: The instrument returns to the bench default conditions. After selecting BENCH, the
instrument returns to the normal display of readings after requesting an ENTER to confirm your
selection.
 GPIB: The instrument returns to the GPIB default conditions. After selecting GPIB, the instrument
returns to the normal display of readings after requesting an ENTER to confirm your selection.
Note that the instrument goes to the Idle state.
Factory default conditions
Function or operation Bench default
(SYSTem:PRESet)
GPIB default (*RST)
A/D Controls:
Line Synchronization On On
Data Stamp:
Temperature (external) Off Off
Humidity Off Off
Hardware Limit On On
Buffer:
Control Fill and stop Fill and stop
Count No effect No effect
time stamp No effect No effect
Elements No effect No effect
Display Yes Yes
Clock No effect No effect
Communications:
Interface (GPIB or RS-232) No effect No effect
GPIB:
Address No effect No effect
Language No effect No effect
Talk-Only (printer setup):
Interface IEEE-4888 IEEE-4888
Interval 1 1
Formfeed Off Off
Page Size 60 Lines 60 Lines
Elements (see note) (see note)
RS-232:
Control (send/receive or talk-only) No effect No effect
Talk-Only (printer setup):
Interval 1 1
Formfeed Off Off
Page Size 60 Lines 60 Lines
Baud Rate No effect No effect
Terminator No effect No effect
Flow Control No effect No effect
Elements No effect No effect

Keithley 6517B Specifications

General

Brand	Keithley
Model	6517B
Category	Measuring Instruments
Language	English