MACHINE OPERATIONS AND CONTROLS
METHOD FOR PARKING MACHINE
• Place the machine on a firm and level place.
Do not park the machine on a slope.
If it is unavoidably necessary to park the machine on a
slope, block the tracks from movement. As an addi-
tional safety measure, thrust the work equipment into
the ground.
• If the control lever is touched by accident, the machine
may move suddenly, and this may lead to a serious
personal injury or death. Set the lock lever securely to
LOCK position always before leaving the operator's
seat.
• Lower the blade to the ground on the downhill side if
the machine is equipped with a blade.
1.
Stop the machine.
For details, see “METHOD FOR STOPPING MACHINE (3-171)”.
2.
Turn the fuel control dial (1) to Low idle (MIN) position and
lower the engine speed.
3.
Lower the bucket horizontally until the bottom touches the
ground.
4.
Lower the blade to the ground if the machine is equipped
with a blade.
To Next Page
Loading...
