3
Scan to E-Mail
3-34 200/250/350
Scan to E-Mail Chapter 3
Resending
You can resend up to 20 failed transmissions.
1 Touch [Job List], then [Type], and then select the document that could
not be sent.
– If [Retry] and [Change Destination] appear in the screen, the docu-
ment does not need to be scanned again.
2 To send to the same destination, touch [Retry].
– To send to a different destination, touch [Change Destination].
4 Transmission result Shows the transmission result. Any of the following
may appear.
OK: The transmission was completed successfully.
INTERR: The transmission was interrupted.
F. MEM: The memory capacity was exceeded.
NG: The transmission failed.
PT. DEL: The transmission to some destinations
failed.
Error code: For details, refer to “Network error list”
on page 11-3.
5 Transmission Image Prints a part of the sent image.
No. Item Description
To Next Page
Loading...
Need help?
General
