Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

9
Specifying management settings
9-58 200/250/350
Specifying management settings Chapter 9
Specifying the deleting method for [Del.] in input screens (mode 478)
Specify the deleting method for [Del.] in input screens.
Select whether the character at cursor’s position or the character to the left
of the cursor is deleted.
Factory settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
2
Note
North American model default setting: 1
Other model default setting: 0
Specifying settings for limiting user authentication to only Scan func-
tions (mode 479)
Specify whether or not user authentication is performed only when the [Fax/
Scan] or [Extra Scan] key is pressed.
Factory settings
Bit 7 6 5 4 3 2 1 0
Setting (North
American
model)
1 0 0 0 0 0 0 0 (HEX: 80)
Setting (Oth-
er model)
0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7 Specify the deleting
method for [Del.] in
input screens.
0 Deletes the character at
the cursor’s position
page 12-4
1 Deletes the character to
the left of the cursor
6, 5, 4, 3, 2,
1, 0
-----------------------
0000000 *Do not change these bits
when specifying settings
for this function.
----------
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)

Konica Minolta Printer/Fax/Scanner/Copier 250 Specifications

General

Brand	Konica Minolta
Model	Printer/Fax/Scanner/Copier 250
Category	All in One Printer
Language	English