Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

Specifying management settings
9
200/250/350 9-33
Specifying management settings Chapter 9
Specifying whether or not the destination name is inserted (mode 001)
Select whether or not the destination name is inserted as transmission
source information.
Factory settings
Specifying settings
The shaded cells indicate the factory settings. The page numbers on the right
side refer to the descriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 1 0 1 0 0 (HEX: 14)
Bit Description Setting Description Page Ref-
erence
7, 6, 5,
4, 3, 2, 1
-------
000101
0
*Do not change these bits
when specifying settings for
this function.
-------
0 Specifies whether or not the
destination name is inserted.
0 The destination name is not
inserted.
-------
1 The destination name is in-
serted.

Konica Minolta Printer/Fax/Scanner/Copier 250 Specifications

General

Brand	Konica Minolta
Model	Printer/Fax/Scanner/Copier 250
Category	All in One Printer
Language	English