Scan to FTP
4
200/250/350 4-17
Scan to FTP Chapter 4
Specifying the transmission report printing conditions
You can specify the conditions for printing a transmission report (TX Report).
The printing conditions for a transmission report are preset with the Report
Settings parameters from the Administrator Management screen. Select the
appropriate printing condition.
Settings can be specified for the following.
To specify the transmission report printing conditions
1 Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
Item Description
Default Displays the printing conditions specified in the Administrator
Management screen.
ON Prints regardless of the results.
If TX Fails Prints when the transmission failed.
OFF Does not print regardless of the results.
One-Touch
Search
Direct
Input
Quality&
Reduction
Menu
Job List
SCANReady
Fine
Chain
100%
IndexList
JPN US
Tokyo Osaka
Nagoya
Fukuok
a
Center
1
Center
2
Memory
Free
To Next Page
Loading...
Need help?
General
