Specifying settings using PageScope Web Connection
8
200/250/350 8-3
Specifying settings using PageScope Web Connection Chapter 8
Scan tab (Administrator mode)
2
Note
If the optional fax kit has been installed, the Scan tab changes to the Fax/
Scan tab.
Item Description
One-Touch Key
Registration
Export Exports the one-touch dial button information registered
on this machine and saves the data as a file.
Import Imports the one-touch dial button information saved on a
computer and writes the data to this machine.
TSI Registration Register the text, such as a name, fax number, or
address, that is printed at the top of pages sent with the
Internet fax operation.
Register the transmission source name that is added at
the top of e-mail messages sent using the Scan to E-Mail
operation.
TX Settings TX Settings Specify the default transmission settings.
Com. Mode Select whether or not each communication mode can be
used.
RX Settings Specify the time and day of the week to print documents
received with the Internet fax operation.
Scan Setting Specify the device name of this machine, which will be
used in file names, and the transmission settings for
scanned data.
TX Document When sending documents from this machine, the docu-
ment can be forwarded simultaneously to the addresses
specified by the administrator. Specify the address of the
forwarding destination.
RX Document Port Specify how documents received over a network are
processed and forwarded.
All Other
Documents
Specify how documents not received over a network are
processed and forwarded.
Report Settings Specify the output conditions of result reports and
transmission reports.
To Next Page
Loading...
Need help?
General
