2
Setup
2-44 200/250/350
Setup Chapter 2
2.11 LDAP Setting
The settings used by the LDAP (Lightweight Directory Access Protocol) serv-
er in a network can be specified.
Settings can be specified for the following.
LDAP Search
1 In the Network Setting screen, touch [LDAP Setting].
2 Touch [LDAP Search].
Item Description
LDAP Search Select whether to enable or disable the address search used by
an LDAP server. When “Yes” is selected, an LDAP server can be
specified.
LDAP Server Setting Register the LDAP server to be accessed. Up to 5 LDAP servers
can be registered in this machine.
Search Default Setting When multiple LDAP servers are registered, select the primary
LDAP server for performing searches.
Utility/Counter
LDAP Setting
Enter
LDAP Search
No
100%
Memory
Free
LDAP Server Setting
To Next Page
Loading...
Need help?
General
