Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

8
Specifying settings using PageScope Web Connection
8-56 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
8.13 Report Settings (Administrator mode)
The conditions for outputting the transmission results report and activity re-
port can be specified.
Settings can be specified for the following.
Item Description
TX Report
(Single
destination)
Select the conditions for outputting the results report for a transmission to a
single destination.
Output On: Select this setting to output the report, regardless of the
transmission result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the
transmission result.
TX Report
(Multiple
destinations)
Select the conditions for outputting the results report for a transmission to
multiple destinations.
Output On: Select this setting to output the report, regardless of the
transmission result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the
transmission result.
Activity Report Select whether or not the activity report is outputted with every 50
transmissions.

Konica Minolta Printer/Fax/Scanner/Copier 250 Specifications

General

Brand	Konica Minolta
Model	Printer/Fax/Scanner/Copier 250
Category	All in One Printer
Language	English