Konica Minolta Printer/Fax/Scanner/Copier 250 - Specifying the Transmission Report Printing Conditions; To Specify the Transmission Report Printing Conditions

5
Scan to SMB
5-16 200/250/350
Scan to SMB Chapter 5
Specifying the transmission report printing conditions
You can specify the conditions for printing a transmission report (TX Report).
The printing conditions for a transmission report are preset with the Report
Settings parameters from the Administrator Management screen. Select the
appropriate printing conditions.
Settings can be specified for the following.
To specify the transmission report printing conditions
1 Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
Setting Description
Default Displays the printing conditions specified in the Administrator
Management screen.
ON Prints regardless of the results.
If TX Fails Prints when the transmission failed.
OFF Does not print regardless of the results.
One-Touch
Search
Direct
Input
Quality&
Reduction
Menu
Job List
SCANReady
Fine
Chain
100%
IndexList
JPN US
Tokyo Osaka
Nagoya
Fukuok
a
Center
1
Center
2
Memory
Free