Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

Specifying management settings
9
200/250/350 9-39
Specifying management settings Chapter 9
Specifying whether to add the transmission source information when
faxing or when forwarding received documents (mode 352)
You can specify how the transmission source information is added when fax-
ing directly and when forwarding received documents.
Factory settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit 7 6 5 4 3 2 1 0
Setting 1 1 0 1 0 0 0 0 (HEX: D0)
Bit Description Status Description Page
Refer-
ence
7 -----------------------------
1 *Do not change this bit when
specifying settings for this
function.
---------
6 Specifies how transmission
source information is added
to direct faxes.
0 Outside of the document ---------
1 Inside the document
5 Specifies whether transmis-
sion source information is
added when forwarding re-
ceived documents.
0Not added page9-4
1Added
4 Specifies how transmission
source information is added
when forwarding received
documents.
0 Outside body text ---------
1Inside body text
3, 2, 1, 0 -----------------------------
0000 *Do not change these bits
when specifying settings for
this function.
---------

Konica Minolta Printer/Fax/Scanner/Copier 250 Specifications

General

Brand	Konica Minolta
Model	Printer/Fax/Scanner/Copier 250
Category	All in One Printer
Language	English