Kubota LX2610 User Manual

Position adjustment
Pull
in the position adjust lever and slide the seat
backward or forward, as required. The seat will lock in
position when the lever is released.
IMPORTANT :
• After adjusting the operator's seat, be sure to
check that the seat is properly locked.
[LX2610/LX3310 CAB model]
(1) Travel adjust lever
(2)
Suspension adjust lever
(3) Arm rest
(4) Arm rest angle adjust knob
(5) Backrest tilt adjust lever
(A) “UNLOCK”
(B) “TO INCREASE TENSION”
(C) “TO DECREASE TENSION”
Travel adjustment
Unlock
the travel adjust lever and slide the seat
backward or forward, as required. The seat will lock in
position when the lever is released.
Suspension adjustment
Turn the suspension adjust lever to achieve the
optimum suspension setting.
Tilt adjustment
Pull the backrest tilt adjust lever and tilt the backrest to
the desired position.
Arm rest
Armrest may be set at upright position if desired.
Armrest angle adjustment
Turn the arm rest angle adjust knob to the desired
angle.
IMPORTANT :
• After adjusting the operator's seat, be sure to
check to see that the seat is properly locked.
2. Seat belt
WARNING
T
o avoid personal injury or death:
• Always use the seat belt when a ROPS or CAB
is installed.
• Do
not use the seat belt if the foldable ROPS is
down or if there is no ROPS.
Adjust the seat belt for proper fit and connect the
buckle. This seat belt is auto-locking retractable type.
(1) Seat belt
3. Tilt steering adjustment [except
LX2610SU]
CAUTION
T
o avoid personal injury:
• Do not adjust the steering wheel while the
tractor is in motion.
Press down the steering wheel tilt pedal to release the
lock, so that the steering wheel can be adjusted to the
desired position.
ROPS model
(1) Steering wheel tilt pedal (A) “Press down”
OPERATING THE TRACTOR STARTING THE TRACTOR
60
LX2610,LX3310

Kubota LX2610 Specifications

General

Brand	Kubota
Model	LX2610
Category	Tractor
Language	English