Kubota LX2610 User Manual

TIRES, WHEELS AND BALLAST
TIRES
WARNING
T
o avoid personal injury or death:
• Do not attempt to mount a tire on a rim. This
should be done by a qualified person with the
proper equipment.
• Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the operator's manual.
IMPORTANT :
• Do not use tires other than those approved by
Kubota.
1. Inflation pressure
Although the tire pressure is factory-set to the
prescribed
level, it naturally drops slowly in the course
of time. Thus, check it every day and inflate as
necessary.
IMPORTANT :
• When using large diameter industry tire with the
mark *, a separate spacer kit is needed.
Rear tire
Tire sizes Inflation pressure
12.4-16.4, 4PR 110 kPa (1.1 kgf/cm
2
, 16 psi.)
13.6-16, 4PR 100 kPa (1.0 kgf/cm
2
, 14 psi.)
12.4-165 Industry, 4PR 138 kPa (1.4 kgf/cm
2
, 20 psi.)
14-17.5 R14, 6PR 210 kPa (2.1 kgf/cm
2
, 30 psi.)
15-19.5 Industry, 4PR*
[ROPS only]
210 kPa (2.1 kgf/cm
2
, 30 psi.)
15-19.5 R14, 8PR
[ROPS only]
210 kPa (2.1 kgf/cm
2
, 30 psi.)
Front tire
Tire sizes Inflation pressure
7-12, 4PR 170 kPa (1.7 kgf/cm
2
, 24 psi.)
24×8.50-14, 4PR 150 kPa (1.5 kgf/cm
2
, 22 psi.)
23×8-14 Industry, 4PR 241 kPa (2.5 kgf/cm
2
, 35 psi.)
23×8.50-12 R14 6PR 234 kPa (2.4 kgf/cm
2
, 34 psi.)
25×8.50-14 Industry,
4PR* [ROPS only]
250 kPa (2.5 kgf/cm
2
, 35 psi.)
25×8.50-14 R14 6PR
[ROPS only]
221 kPa (2.2 kgf/cm
2
, 32 psi.)
2. Dual tires
Dual tires are not approved.
WHEEL ADJUSTMENT
WARNING
T
o avoid personal injury or death:
• When working on slopes or when working with
a trailer, set the wheel tread as wide as practical
for maximum stability.
• Support the tractor securely on stands before
removing a wheel.
• Do not work under any hydraulically supported
devices. They can settle, suddenly leak, or be
accidentally lowered. If necessary to work
under the tractor or any machine elements for
servicing or adjustments, securely support
them with stands or suitable blocking
beforehand.
• Never operate the tractor with a loose rim,
wheel or axle.
1. Front wheels
Front tread width can not be adjusted.
IMPORT
ANT :
• Do not turn front discs to obtain wider tread.
In setting up the front wheels, make sure that
the inflation valve stem of the tires face
outward.
• When re-fitting or adjusting a wheel, tighten the
bolts to the following torques then recheck after
driving the tractor 200 m (200 yard) and 10
times of shuttle movement by 5 m (5 yard), and
thereafter according to service interval.
(See MAINTENANCE on page 103.)
TIRES, WHEELS AND BALLAST TIRES
90
LX2610,LX3310

Kubota LX2610 Specifications

General

Brand	Kubota
Model	LX2610
Category	Tractor
Language	English