(1) Wheel nut
Fitting
1. Mount
the wheel on axle and lightly tighten the
wheel nuts.
2. Lower the machine to the ground, and tighten the
wheel nuts to the specified torque in the order
shown in the following table and figure.
Order of tightening the wheel nuts
Wheel nut Tightening torque 490 N⋅m
4. Mounting the tires
Off-road tires are used to provide strong traction and
buoyancy on soft ground.
1. T
ires should only be mounted on a rim by qualified
personnel with the proper equipment.
When mounting, ensure that the tread pattern is
mounted in the correct direction. (See the following
figure).
(1) Tire (A) Correct
(B) Incorrect
(C) Forward
5. Tire chains
Tire chains are not applicable for 20 inches size tire.
SERVICE FOR TIRES PERIODIC SERVICE
To Next Page
Loading...
Need help?
General
