AUXILIARY PORT OPERATION
Use the auxiliary-port-enable-switch to operate the hydraulic attachment such as 4in1 bucket.
1. Selecting the action modes
The AUX port has been factory-set to only 1 mode (Mode 1). As necessary, you can preset up to 6 action modes.
1. Select the action mode pressing the AUX-port-enable-switch.
Each
time the AUX-port-enable-switch is pressed, the action modes change over one after another, and the icon
and action-mode-number on the screen change accordingly.
(1) Indicator
(2)
Display selector switch
(3) AUX port enable switch
[a] Mode 0 (AUX disable (normal
screen))
[b] Mode 1
[c] Mode 2
(a) No lighting
(b) Lighting
(c) Blinking
(A) No activation
(B) MAX. flow volume
(C) Limited flow volume
Checking the setting volume
1.
Press the display-selector-switch when the action-mode-number “AUX-1” is displayed on the screen.
The screen will vary per second.
(1) Memory number
(2)
Lever side (forward)
(3) Flow volume
(4) Lever side (downward)
OPERATION OF THE MACHINE AUXILIARY PORT OPERATION
To Next Page
Loading...
Need help?
General
